SmartSolo®IGU-16

Appearance

igu-diagram-labeled
DOWNLOAD

Physical Specs

Size: 95mm x 103mm x 118mm (without spike)

Weight: 1.1 kg (including internal battery and spike)

Waterproof: IP67

Operating Temperature: -40℃ to +70℃

Battery: 38.48 Wh

Operating Life @ 25°C

25 days @ 1ms continuous

50 days segmented (12hours ON/12hours SLEEP)

Tech Specs

Sensor Specs
DT-SOLO 10Hz
(All parameters are specified at +25 °C in the vertical position unless otherwise stated.)

Natural Frequency: 10Hz
Coil Resistance: 1800Ω
Damping: Open Circuit Damping 0.51
Damping with 20 KΩ 0.70
Sensitivity: Open Circuit Intrinsic Voltage Sensitivity 85.8V/m/s(2.18V/in/s)
Distortion: ＜0.1%

Sensor Specs
DT-SOLO 5Hz
(All parameters are specified at +22 °C in the vertical position unless otherwise stated.)

Natural Frequency: 5Hz
Coil Resistance: 1850Ω
Damping: Open Circuit Damping 0.60
Damping with 43 KΩ 0.70
Sensitivity: Open Circuit Intrinsic Voltage Sensitivity 80 V/m/s (2.03V/in/s)
Distortion: ＜0.1%

Smart Electronics Specs
(@ 1ms sample interval, 31.25 HZ, 25°C unless otherwise indicated)

 

Standard HR
ADC Resolution 24bits 24bits
Sample Intervals 1,2,4 milliseconds 0.25, 0.5, 1, 2, 4 milliseconds
Preamplifier Gain: 0dB to 24 dB in 6 dB steps 0dB to 36dB in 6dB steps
Anti-alias Filter 206.5 Hz @ 2ms (82.6% of Nyquist) selectable – linear phase or minimum phase 206.5 Hz @ 2ms (82.6% of Nyquist)Selectable – Linear Phase or Minimum Phase
DC Blocking Filter 1HZ to 10Hz,1Hz increments or DC Removal 1Hz to 10Hz,1Hz increments or DC Removal
GPS Time Standard 1ppm 1ppm
Timing Accuracy ±10μs, GPS disciplined ±10μs, GPS disciplined
Maximum Input Signal 2.5Vpeak @ Gain 0dB 2.5Vpeak @ Gain 0dB
Equivalent Input Noise 0.71 μV @ 2ms @ Gain 12dB (Typical) 0.18µV @ 2ms @ Gain 18 dB
Instantanteous Dynamic Range 116dB@ 2ms @ Gain 0dB 125dB @ 2ms Gain 0 dB
Total Harmonic Distortion <0.0005% < 0.0002% @ Gain 0dB
Common Mode Rejection ≥100dB ＞100 dB
Gain Accuracy <1% ＜0.5%
System Dynamic Range 140dB 145dB
Frequency Response 0~413Hz 0~1652Hz