SmartSolo

Seismic Sensor

SmartSolo provides multiple types of cost-effective wireless seismic sensors for sale. Its applications include oil and gas exploration, scientific research, border security, and more.

Contact Now

SmartSolo

Vibration Sensor

As one of leading vibration sensor manufacturers, SmartSolo vibration sensors have been applied in buildings, construction, earthquake, underground, bridges, ground, vehicle and mechines.

Contact Now

Seismic Data Acquisition Equipment

SmartSolo is re-difining the future of seismic data acquisition industry, developing new technology in both refraction and reflection data acquisition. Its seismic acquisitioin system, software, devices, instruments and services are ideal choices for geophysicist and companies.

The seismic acquisition equipment is light, small, easy to use, cost-effective and highly reliable, providing seismic data output.

The seismic data acquisition system offers wireless, terrestrial, seismological, onshore, geophysical and broadband 2D 3D and 4D seismic data survey on land.

Contact Now

Products

IGU-16 : geophone vibration sensor
Description	SmartSolo IGU-16 a 1 one single channel (1 c) seismic wave detection device that is widely used in numerous applications, such as oil and gas exploration, geothermal exploration and more. At present, IGU-16 and its upgraded edition IGU-16HR are available on the seismic sensor market.
Physical	Physical Size: 95mm(L) x 103mm(W) x 118mm(H)(w/o spike） Weight: 1.1kg (Including internal battery and spike) Waterproof: IP67 Operating temperature: -40℃ ~ +70℃ Battery: 38.48Wh Operating Life@25°C: 25 days @1ms Continuous / 50 days, Segmented (12hours ON/12hours SLEEP)
Features	Lower Cost per channel in the seismic industry. Light Weight - 1.1KG including battery and spike. Small Footprint - 95mm X 103mm Built-in 8GB Non-volatile Flash Memory and it could be expanded to 32GB. Mobile App - scanning and technical support. DT-SOLO - high-sensitivity sensor technology (5Hz and 10Hz optional). No Exposed Connector in the field. Optional external battery and sensor. 50 days operating life. Automatic sensor testing and GPS logging. Stake-less operating for maximum flexibility. Auto-scan mode for faster deployment.
Sensor with 5Hz	Natural Frequency: 5Hz Coil Resistance: 1850Ω Open Circuit Damping: 0.6 Damping with 43Ω: 0.7 Open Circuit Intrinsic Voltage Sensitivity: 80V/m/s (2.03V/in/s) Distortion: <0.1% Remark: All parameters are specified at +22℃in the vertical position unless otherwise stated.
Sensor with 10Hz	Natural Frequency: 10Hz Coil Resistance: 1800Ω Open Circuit Damping: 0.51 Damping with 43Ω: 0.7 Open Circuit Intrinsic Voltage Sensitivity: 85.8V/m/s (2.18V/in/s) Distortion: <0.1% Remark: All parameters are specified at +25℃ in the vertical position unless otherwise stated.
Channel of IGU-16	(1ms sample interval, 31.25 HZ, 25°C unless otherwise indicated) ADC Resolution: 24bits Sample Intervals: 1,2,4 ms Preamplifier Gain: 0dB to 24 dB in 6 dB steps Anti-alias Filter: 206.5 Hz 2ms (82.6% of Nyquist) selectable - linear phase or minimum phase DC Blocking Filter: 1HZ to 10Hz,1Hz increments or DC Removal GPS Time Standard: 1ppm Timing Accuracy: ±10μs, GPS disciplined Maximum Input Signal: 2.5Vpeak Gain 0dB Equivalent Input Noise: 0.71 μV 2ms Gain 12dB (Typical) Instantaneous Dynamic Range: 116dB 2ms Gain 0dB Total Harmonic Distortion: <0.0005% Common Mode Rejection: ≥100dB Gain Accuracy: <1% System Dynamic Range: 140dB Frequency Response: 0~413Hz
Channel of IGU-16 HR	(1ms sample interval, 31.25 HZ, 25°C unless otherwise indicated) ADC Resolution: 24bits Sample Intervals: 0.25, 0.5, 1,2,4 ms Preamplifier Gain: 0dB to 36 dB in 6 dB steps Anti-alias Filter: 206.5 Hz 2ms (82.6% of Nyquist) selectable – linear phase or minimum phase DC Blocking Filter: 1HZ to 10Hz,1Hz increments or DC Removal GPS Time Standard: 1ppm Timing Accuracy: ±10μs, GPS disciplined Maximum Input Signal: 2.5Vpeak @ Gain 0dB Equivalent Input Noise: 0.18 μV 2ms Gain 18dB (Typical) Instantaneous Dynamic Range: 125dB 2ms Gain18 dB Total Harmonic Distortion: <0.0002% @ Gain 0dB Common Mode Rejection: ＞100dB Gain Accuracy: <0.5% System Dynamic Range: 145dB Frequency Response: 0~1652Hz

IGU-16HR 3C : high resolution 3c seismic survey instrument
Description	SmartSolo IGU-16HR 3C is a 3-channel seismic sensor device that has better performance compared with the single 1-channel IGU-16 version. This 3C seismic detector is widely used in the active source seismic exploration, long-term natural micro-motion observation, transient surface wave survey, earthquake monitoring and more.
Features	New generation smart 3C seismic sensor. Share the same peripherals as IGU-16. Save more for the equipment investment. High resolution data with up to 0.25ms sampling and 24-bit delta-sigma ADC. All-in-one modular design provides maximum productivity maintenance free operation and easy battery replacement. Built-in GPS receiver and disciplined high precision clock. Suitable for one station to million station operations. Based on the most highly regarded DT-SOLO HS geophone with 5Hz and 10Hz options. Up to 30 days of continuous recording. Most cost-effective system on the market. Compatible with vibroseis and impulsive energy sources. Light weight and compact size. Simple LED state indicator – green for good to go and red for not well.
General	Seismic data channel: 3 ADC resolution: 24 bits Sample intervals: 0.25, 0.5, 1, 2, 4, 8, 10, 20 ms Preamplifier gain: 0dB to 36 dB in 6 dB steps Anti-alias filter: 206.5 Hz @ 2ms (82.6% of Nyquist) Selectable - Linear Phase or Minimum Phase DC blocking filter: 1Hz to 10Hz, 1Hz increments or DC Removed Operating temperature: -40℃ ~ +70℃ Waterproof: IP67 Data Storage: 64 GB Charging Temperature Range: +3˚C ~ +45˚C
High-Capacity Battery Pack	Physical Size: 103mm (L) × 95mm (W) ×187mm (H) (w/o spike) Weight: 2.4kg (Including internal battery and spike) Operating Life@25℃: 30 days Continuous @ 2ms / 60 days Segmented (12hours ON/12hours SLEEP) Recharge Time: < 6 hours
Standard Battery Pack	Physical Size: 103mm (L) × 95mm (W) ×150mm (H) (w/o spike) Weight: 1.7kg (Including internal battery and spike) Operating Life@25℃: 15 days Continuous @ 2ms / 30 days Segmented (12hours ON/12hours SLEEP) Recharge Time: < 3.5 hours
Sensor	Natural Frequency: 5Hz Spurious Frequency: >170Hz (>150Hz in horizontal sensor) Distortion: <0.1%@12Hz, (0° ~ 10°)V tilt. / <0.15%, (0°~3°) H tilt" Damping: 0.7 Sensitivity: 76.7V/m/s (1.95 V/in/s) Remark: All parameters are specified at +22℃in the vertical position for vertical geophone and horizontal position for horizontal geophone unless otherwise stated.
Channel	(@ 2ms sample interval, 31.25 Hz, 25℃, unless otherwise indicated) Maximum Input Signal: ±2.5Vpeak @ Gain 0dB Instantaneous Dynamic Range: 125dB@ 2ms Gain 0dB Equivalent Input Noise: 0.18µV@ 2ms Gain 18dB Total Harmonic Distortion: <0.0002%@ Gain 0dB Common Mode Rejection: >100dB Gain Accuracy: <0.5% GPS Time Standard: 1ppm Timing Accuracy: ±10µs, GPS Disciplined Cross Feed: < -110dB System Dynamic Range: 145dB Frequency Response: 0~1652Hz

IGU-BD3C-5 : broadband seismic acquisition equipment
Description	SmartSolo IGU-BD3C 5 is a low-cost and micropower consumption broadband smart seismic sensors. Based on the high sensitivity geophone DT-SOLO produced by DTCC, and incorporated with electronics and software technologies in mobile internet era. With internationally well-received and reliable electronic spread spectrum technology, and frequency band range of IGU-BD3C-5 is up to 0.2Hz to 150Hz. Due to its high reliability and high level of customization of storage and power capacity, it is very suitable not only for traditional active seismic exploration, but also for long-period observation of natural microseismic, transient surface wave survey and mobile station natural earthquake monitoring, etc.
Features	New generation 3 components smart seismic sensor. High resolution data with up to 0.25ms sampling and 24-bit delta-sigma ADC. Low frequency can reach to 5s. seismic data monitoring and sensor status QC. Internal battery supports up to 30 days of continuous recording. Internal 32GB memory can be expanded to 64GB. Support for external power supply and Bluetooth QC. Dual LED status QC indicate Bluetooth, battery level and working status. Built-in GPS receiver and time-disciplined high precision clock. Compatible with vibroseis and impulsive energy sources.
Physical	Seismic data channel(s): 3 ADC resolution: 24 bits Sample intervals: 0.25, 0.5, 1, 2, 4, 8,10, 20 ms Self-noise Level: Whole frequency band lower than the NHNM curve，5s~1Hz lower than the NLNM curve Operating temperature: -40℃ ~ +70℃ Waterproof: IP67 Physical Size: φ158mm × 160mm (w/o spike) Weight: 2.8 kg (Including internal battery and spike) Data Storage: 32GB (can be expanded to 64GB) Operating Life@25℃: 30 days Continuous / 60 days Segmented (12hours ON/12hours SLEEP) External Power Supply: 7V~15V DC (single supply) Bluetooth QC: Available Data Harvesting: USB 3.0 Charging Temperature Range: +3˚C ~ +45˚C
Sensor	Frequency Bandwidth: 0.2Hz~150Hz Distortion: <0.1% @12Hz, (0° ~ 10°) tilt，(0°~3°) horizontal tilt Sensitivity: 200V/m/s (5.08 V/in/s) Remark: All parameters are specified at +22℃ in the vertical position and horizontal position for horizontal geophone unless otherwise stated.
Channel	(@ 2ms sample interval, 31.25 Hz, 25°C, unless otherwise indicated) Maximum Input Signal: ±2.5Vpeak @ Gain 0dB Instantaneous Dynamic Range: 120dB@ Gain 0dB Common Mode Rejection: >100dB Gain Accuracy: < 1% GPS Time Standard: 1 ppm Timing Accuracy: ± 10µs, GPS Disciplined Cross Feed: < -110dB Inter-channel Phase Offset: <0.1ms Transverse Vibration Rejection: Better than 1% Inter-channel Amplitude Coherence: 5% System Dynamic Range: 140dB Frequency Response: 0~1652Hz

IAU-19 : hydrophone seismic sensor
Description	The IAU means intelligent acquisition unit, a highly versatile seismic recording device, belonged to the series of SmartSolo seismic sensors. SmartSolo IAU-19 with external geophone or hydrophone is widely used for applications in land, marsh, desert, shallow water and deep water. A handheld mobile device is used to perform a wireless and comprehensive health check of the IAU-19, and it is ideal for clients who want to take advantage of high-efficiency node/point operations while still using more traditional external seismic sensing devices.
Features	Wireless QC of recording parameters like battery voltage, temperature, storage, GPS, sensor status, ambient noise, signals and more. Work with external geophones and hydrophones to help conduct seismic surveys in land, marsh, desert, shallow water and Deepwater. IP68 water resistant, the highest level of particle protection. Built-in high-capacity rechargeable battery. External sensor leak-detection capability. 16GB of internal storage. Fast data download.
General	Seismic data channel(s): 1 ADC resolution: 24 bits Sample intervals: 0.25, 0.5, 1, 2, 4 ms Preamplifier gain: 0dB to 36 dB Anti-alias filter: 206.5 Hz 2ms (82.6% of Nyquist), Selectable - Linear Phase or Minimum Phase DC blocking filter: 1Hz to 10Hz,1Hz increments or DC Removed Data Storage: 16GB internal memory Operating Life 25℃: 25 days Continuous, 50 days Segmented (12hours ON/12hours SLEEP) Recharge Time: < 3 hours Charging Temperature Range: +3℃ ~ +40℃ Wireless QC: Recording parameters, battery voltage, temperature, remaining data storage, GPS position and quality, connected sensor status
Physical	Physical Size: 132mm(L)×97mm(W)×50mm(H) (Without external DCK plug) Weight: 0.8 kg Operating temperature: -40℃ ~ +70℃ Waterproof: IP68
Channel	(2ms sample interval, 31.25 Hz, 25°C, unless otherwise indicated) Maximum Input Signal: ±2.5Vpeak Gain 0dB Dynamic Range: 125dB 2ms Gain 0dB Equivalent Input Noise: 0.18µV 2ms Gain 18dB Total Harmonic Distortion: < 0.0002% Gain 0dB Common Mode Rejection: ≥100dB Gain Accuracy: < 0.5% GPS Time Standard: 1 ppm Timing Accuracy: ± 10µs, GPS Disciplined

Applications

Resource

Involved in oil, gas, petroleum, geothermal, coal and energy exploration activities.
Earthquake

SmartSolo seismic technology can easily detect earthquakes and micro-vibration.
Health

Health monitoring of equipment, rock soil, buildings, people, animals and plants.

Environment

Provide advanced techniques for environmental monitoring on both marine and land.
Moving

Monitor and detect any movement coming from human-beings and animals.
Security

border monitoring to help ensure national security

How SmartSolo works?

Deployment

Deploy and activate the SmartSolo seismic sensors on the sites.

Acquisition

SmartSolo seismic data acquisition equipment start working.

Output

The instruments will download all data and display the results.

SmartSolo

Seismic Sensor

SmartSolo

Vibration Sensor

Seismic Data Acquisition Equipment

Contact Now

SmartSolo - Seismic & Vibration Sensor

Products

Applications

Resource

Earthquake

Health

Environment

Moving

Security

How SmartSolo works?

Deployment

Acquisition

Output

Simple & Clean Interface

Contact Us