SmartSolo®IGU-16HR

Appearance

igu-16hr-smartsolo-com

Physical Specs

Physical Size: 103mm (L) x 95mm (W) x 118mm (H) (w/o spike)

Weight: 1.1 kg (Including internal battery and spike)

Waterproof: IP67

Recharge Time: < 3.25 hours

Charging Temperature Range: +3℃ to +45℃

Operating Temperature: -40℃ to +70℃

Operating Life @ 25°C

25 days @ 1ms Continuous

50 days Segmented (12hours ON/12hours SLEEP)

Tech Specs

Sensor Specs
DT-SOLO 10Hz

(All parameters are specified at +25 °C in the vertical position unless otherwise stated.)

Natural Frequency: 10Hz
Coil Resistance: 1800Ω
Damping: Open Circuit Damping 0.51
Damping with 20 KΩ 0.70
Sensitivity: Open Circuit Intrinsic Voltage Sensitivity 85.8V/m/s(2.18V/in/s)
Distortion: <0.1%

Sensor Specs
DT-SOLO 5Hz

(All parameters are specified at +22 °C in the vertical position unless otherwise stated.)

Natural Frequency: 5Hz
Coil Resistance: 1850Ω
Damping: Open Circuit Damping 0.6
Damping with 43 KΩ 0.70
Sensitivity: Open Circuit Intrinsic Voltage Sensitivity 80 V/m/s (2.03V/in/s)
Distortion: <0.1%

Electronics Specs
(@ 2ms sample interval, 31.25 HZ, 25°C unless otherwise indicated)

ADC Resolution 32bits
Sample intervals 0.25, 0.5, 1, 2, 4 ms
Preamplifier gain: 0dB to 36dB, in 6dB steps
Anti-alias filter 206.5 Hz @ 2ms (82.6% of Nyquist)

Selectable – Linear Phase or Minimum Phase

DC blocking filter 1Hz to 10Hz,1Hz increments or DC Removal
GPS Time Standard 1ppm
Timing Accuracy ±10μs, GPS Disciplined
Maximum Input Signal ±2.5Vpeak @ Gain 0dB
Equivalent Input Noise 0.18µV @ 2ms @ Gain 18 dB
Instantanteous Dynamic Range 125dB @ 2ms Gain 0 dB
Total Harmonic Distortion < 0.0002% @ Gain 0dB
Common Mode Rejection >100 dB
Gain Accuracy <0.5%
System Dynamic Range 145dB
Frequency Response 0~1652Hz