Tags: Vertical Geophone, Passive Seismic Surveys, Geophone, Marsh Strings, Hydrophone, Intelligent External Seismic Sensor, Built-In Dt-Solo High-Sensitivity Sensor, External Sensor Option, Smart Seismometers
The Smart Seismic Sensor 1C with External Sensor Connection is a cutting-edge solution designed to elevate your passive seismic surveys to new heights. With its advanced technology and vertical geophone capability, this sensor enables you to unlock a wealth of valuable data and insights for your geophysical research and analysis.
◆Harness the Power of Vertical Geophones: Equipped with vertical geophones, the Smart Seismic Sensor 1C offers enhanced sensitivity and accuracy in detecting ground vibrations. Capturing data in the vertical direction, provides a comprehensive view of the subsurface dynamics, allowing you to gain deeper insights into seismic activities and geological structures.
◆Optimized for Passive Seismic Surveys: Designed specifically for passive seismic surveys, this sensor excels in capturing low-frequency signals emitted by natural seismic sources or man-made disturbances. Its high sensitivity and wide frequency response enable the detection of subtle seismic events, providing a wealth of information for seismic imaging, reservoir characterization, and earthquake monitoring.
- 139.6mm(L)×95mm(W)×131.7mm(H)(w/o spike)
- 1.3kg(Including internal battery and spike)
- 8GB
- 32GB
- <3.25 hours
- 32 days Continuous@ 2ms
- 64 days Segmented (12hours ON/12hours SLEEP) @ 2ms
- Bluetooth
- Exchange EB battery
- Natural Frequency : 5Hz
- Spurious Frequency : >170Hz
- Distortion : <0.1%@12Hz, (0° ~ 10°) vertical tilt
- Damping : 0.7
- Open Circuit Intrinsic Voltage Sensitivity : 80 V/m/s (2.03 V/in/s)
- Remark : All parameters are specified at +22°C in the vertical position for vertical geophone and horizontal position for horizontal geophone unless otherwise stated
- Natural Frequency : 10Hz
- Spurious Frequency : >240Hz
- Distortion : <0.1%@12Hz, (0° ~ 10°) vertical tilt
- Damping : 0.7
- Open Circuit Intrinsic Voltage Sensitivity : 85.8 V/m/s (2.18 V/in/s)
- Remark : All parameters are specified at +25°C in the vertical position for vertical geophone and horizontal position for horizontal geophone unless otherwise stated.
- Seismic data channel(s) : 1
- ADC resolution : 32 bits
- Sample intervals : 0.25, 0.5, 1, 2, 4 milliseconds
- Preamplifier gain : 0dB to 36 dB in 6 dB steps
- Anti-alias filter : 206.5 Hz @ 2ms (82.6% of Nyquist)Selectable - Linear Phase or Minimum Phase
- DC blocking filter : 1Hz to 10Hz, 1Hz increments or DC Removed
- Operating temperature : -40°C ~ +70°C
- Waterproof : IP67
- Charging Temperature Range : +3°C ~ +45°C
- Maximum Input Signal : ±2.5Vpeak @ Gain 0dB
- Equivalent Input Noise : 0.18μV @ 2ms Gain 18dB
- Total Harmonic Distortion : <0.0002% @ Gain 0dB
- Common Mode Rejection : ≥100dB
- Gain Accuracy : <0.5%
- GPS Time Standard : 1ppm
- Timing Accuracy : ±10μs, GPS Disciplined
- System Dynamic Range : 145dB
- Frequency Response : 0 ~ 1652Hz
- Wireless Communication : Bluetooth Low Energy
- Remark : All parameters are specified at 2ms sample interval, 31.25 Hz, 25°C, unless otherwise indicated
Key Features:
●External Sensor Connection: The Smart Seismic Sensor 1C features an external sensor connection, allowing for flexible deployment and expanded monitoring capabilities. You can easily connect additional sensors to gather data simultaneously from multiple locations, enhancing the spatial coverage of your survey.
●Advanced Data Acquisition: With its state-of-the-art data acquisition system, this sensor ensures reliable and precise measurements. It captures seismic signals with high fidelity, enabling accurate interpretation and analysis of the recorded data.
●Robust Construction: Built to withstand the challenges of fieldwork, the Smart Seismic Sensor 1C boasts a rugged construction. It is engineered to withstand harsh environmental conditions, ensuring reliable performance even in demanding terrains.
●User-Friendly Interface: The sensor's intuitive interface simplifies the configuration and control processes. You can easily adjust settings, monitor real-time data, and download recordings for further analysis, all through a user-friendly interface that requires minimal training.
●Compatibility and Integration: The Smart Seismic Sensor 1C seamlessly integrates with leading geophysical software and data processing tools. It supports various data formats and interfaces, facilitating smooth data exchange and integration into your existing workflow.
Unleash the power of vertical geophones and elevate your passive seismic surveys to a new level of precision and insight with the Smart Seismic Sensor 1C. Benefit from its external sensor connection, advanced data acquisition, and robust construction to unravel the secrets of the subsurface and make informed decisions for your geophysical projects.